InBio carries out the matching of fingerprints on the panels. The FR Series of readers transmit fingerprint templates to InBio via RS-485 for fast and accurate matching with templates stored in a data-base. InBio controllers install easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery tool allows setting and modication of network parameters directly and easily.
InBio controller firmware can be upgraded in the field.Stores up to 3,000 fingerprint templates, 30,000 card users, and up to 100,000 events and transactions. Controller is backed up in real-time in on-board SD card. Data is preserved if power is lost. InBio continues to opperate if network conection is interrupted. Along with relay contacts for controlling door locks, easily programmable auxilary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers.
Features:
- Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
- Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
- Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
- Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators
- Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK's biometric reader controllers.
- Easy-to-use and intuitive programming with ZKAccess Software
- System management by browser from client PC's. No need to install software on each client
- Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
- Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported.
- Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.
Specifications:
- Users: 30,000
- Event Buffer: 100,000 transactions
- CPU: 32bit, 400MHz
- RAM: 32MB
- Communication : RS485, TCP/IP
- Reader Port: 2 ports 26/34bit Wiegand; 2 ports 8bit burst for PIN
- Input Port: 4 Auxillary Input; 4 Door Sensor; 4 Request to Enter
- Output Port: 4 ports Aux FORM-C relay output-SPDT 2A@30V AC; 4 ports FORM-C relay output-SPDT 5A@36V DC or 8A@30V AC
- Baud Rate: RS485, 9600-38400 baud
- LED Indicator: communication, power, status and prox card
- Power Supply: 9.6V-14.4V DC, 1.5A
- Operating Temperature: 0 ~ 45ºC
- Operating Humidity: 20% to 80%
- Dimensions L x W: 218 x 106 mm
InBio controller firmware can be upgraded in the field.Stores up to 3,000 fingerprint templates, 30,000 card users, and up to 100,000 events and transactions. Controller is backed up in real-time in on-board SD card. Data is preserved if power is lost. InBio continues to opperate if network conection is interrupted. Along with relay contacts for controlling door locks, easily programmable auxilary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers.
Features:
- Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
- Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
- Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
- Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators
- Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK's biometric reader controllers.
- Easy-to-use and intuitive programming with ZKAccess Software
- System management by browser from client PC's. No need to install software on each client
- Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
- Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported.
- Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.
Specifications:
- Users: 30,000
- Event Buffer: 100,000 transactions
- CPU: 32bit, 400MHz
- RAM: 32MB
- Communication : RS485, TCP/IP
- Reader Port: 2 ports 26/34bit Wiegand; 2 ports 8bit burst for PIN
- Input Port: 4 Auxillary Input; 4 Door Sensor; 4 Request to Enter
- Output Port: 4 ports Aux FORM-C relay output-SPDT 2A@30V AC; 4 ports FORM-C relay output-SPDT 5A@36V DC or 8A@30V AC
- Baud Rate: RS485, 9600-38400 baud
- LED Indicator: communication, power, status and prox card
- Power Supply: 9.6V-14.4V DC, 1.5A
- Operating Temperature: 0 ~ 45ºC
- Operating Humidity: 20% to 80%
- Dimensions L x W: 218 x 106 mm
