PR402DR access controllers may operate as standalone access control units or in integrated access control system with CPR32-SE network controller. In standalone mode PR402DR autonomously supervise two-way door passage and do not need to communicate with PC nor any other equipment, events are registered in their internal buffer and time related functions are managed by built-in real time clock. Access control system based on PR402DR controllers can be managed locally through COM/USB serial port or remotely by computer network WAN/LAN. Unit is equipped with power supply module and can operate with one or two readers. PR402DR is mounted inside plastic enclosure dedicated for installation on 35mm DIN rail.
Features:
• Two way, single door access controllers
• Support for Wiegand, Magstripe, PRT (Roger) readers and others
• Built-in 1.5A buffered supply module
• Eight programmable NO/NC inputs
• Two programmable 1A transistor outputs
• One programmable 1.5A relay output
• One programmable 5A/230VAC relay output
• RS485 communication bus
• Free topology of communication bus (star or tree topology allowed)
• 4000 users
• 99 time schedules
• 250 user groups
• Built-in 32.000 event buffer
• Local APB
• Global APB (requires CPR in the system)
• Operation with XM-2 I/O extension module
• Integration with burglary system through I/Os
• Door operating modes: Normal, Locked, Unlocked, Conditional Unlocked
• User identification: Card or PIN, Card and PIN, Card only, PIN only
• Two Persons, High Security and other advanced access options
• Quick user editing (less than 5 seconds per each controller in system)
• Management through Ethernet (LAN/WAN), USB or COM
• System can be divided into separate branches (networks, subsystems)
• Multiple networks doesn’t increase system programming time
• 32 floor lift control (requires XM-8 I/O extension module)
• DIN RAIL 35mm enclosure
• CE mark
Specifications:
Supply voltage: 18 VAC; 12VDC; 24VDC
Current consumption: 100 mA (average)
Backup battery: 13.8V/7Ah, charging current app. 300mA
Environmental: class Class I, indoor general conditions,
Temperature: +5?ºC ~ +40?ºC
Relative humidity: 10 to 95% (no condensation)
Dimensions: 85 X 124 X 73 mm
Weight: 200g
Certificates CE
Features:
• Two way, single door access controllers
• Support for Wiegand, Magstripe, PRT (Roger) readers and others
• Built-in 1.5A buffered supply module
• Eight programmable NO/NC inputs
• Two programmable 1A transistor outputs
• One programmable 1.5A relay output
• One programmable 5A/230VAC relay output
• RS485 communication bus
• Free topology of communication bus (star or tree topology allowed)
• 4000 users
• 99 time schedules
• 250 user groups
• Built-in 32.000 event buffer
• Local APB
• Global APB (requires CPR in the system)
• Operation with XM-2 I/O extension module
• Integration with burglary system through I/Os
• Door operating modes: Normal, Locked, Unlocked, Conditional Unlocked
• User identification: Card or PIN, Card and PIN, Card only, PIN only
• Two Persons, High Security and other advanced access options
• Quick user editing (less than 5 seconds per each controller in system)
• Management through Ethernet (LAN/WAN), USB or COM
• System can be divided into separate branches (networks, subsystems)
• Multiple networks doesn’t increase system programming time
• 32 floor lift control (requires XM-8 I/O extension module)
• DIN RAIL 35mm enclosure
• CE mark
Specifications:
Supply voltage: 18 VAC; 12VDC; 24VDC
Current consumption: 100 mA (average)
Backup battery: 13.8V/7Ah, charging current app. 300mA
Environmental: class Class I, indoor general conditions,
Temperature: +5?ºC ~ +40?ºC
Relative humidity: 10 to 95% (no condensation)
Dimensions: 85 X 124 X 73 mm
Weight: 200g
Certificates CE