360º Bus ceiling PIR motion detector. 100+ Series
The product is a bus system device for the JABLOTRON 100+. It is designed to detect human body motion inside buildings. Compared to standard motion detectors from the JABLOTRON 100+ series, this detector is designed for ceiling installation. It is installed on the ceiling and its guaranteed detection coverage is 360° with a capture radius of up to 5.5 m at a mounting height of 3.5 m.
The resistance to false alarms is adjustable at two levels
The detector has a pulse response and occupies one position in the system.
For automation functions, the detection sensitivity can be increased in the triggered system status.
A circular spacer (PLV-P-ST) has been developed as a certified accessory for ceiling mounted detectors so the bus cable can be hidden in cases where it cannot be neatly hidden in the ceiling.
Specifications
- Power supply: via the control panel bus 12 V (9 ... 15 V)
- Backup (idle) mode current consumption: 2.8 mA
- Current consumption for cable selection: 30 mA
- Recommended installation height: 2.5 - 3.5 m above the floor level
- Detection angle/detection coverage: 360°/11 m (at a 3.5 m installation height)
- Dimensions: diam. 125 x 40 mm
- Classification: EN 50131-1 ed. 2+A1+A2, EN 50131-2-2
- Environment according to: EN 50131-1 II. indoor, general
- Operation temperature range: -10 °C to +40 °C
- It also meets the requirements of: EN 50130-4 ed. 2+A1, EN 55032, EN 50581
The product is a bus system device for the JABLOTRON 100+. It is designed to detect human body motion inside buildings. Compared to standard motion detectors from the JABLOTRON 100+ series, this detector is designed for ceiling installation. It is installed on the ceiling and its guaranteed detection coverage is 360° with a capture radius of up to 5.5 m at a mounting height of 3.5 m.
The resistance to false alarms is adjustable at two levels
The detector has a pulse response and occupies one position in the system.
For automation functions, the detection sensitivity can be increased in the triggered system status.
A circular spacer (PLV-P-ST) has been developed as a certified accessory for ceiling mounted detectors so the bus cable can be hidden in cases where it cannot be neatly hidden in the ceiling.
Specifications
- Power supply: via the control panel bus 12 V (9 ... 15 V)
- Backup (idle) mode current consumption: 2.8 mA
- Current consumption for cable selection: 30 mA
- Recommended installation height: 2.5 - 3.5 m above the floor level
- Detection angle/detection coverage: 360°/11 m (at a 3.5 m installation height)
- Dimensions: diam. 125 x 40 mm
- Classification: EN 50131-1 ed. 2+A1+A2, EN 50131-2-2
- Environment according to: EN 50131-1 II. indoor, general
- Operation temperature range: -10 °C to +40 °C
- It also meets the requirements of: EN 50130-4 ed. 2+A1, EN 55032, EN 50581