Bus module for connection of an Ei208 CO detectors
This is a plug-in module designed for direct installation in a stand-alone Ei208W or Ei208DW CO detector, which enables its bus connection to the JABLOTRON 100 system.
It transmits information about an alarm, detector activation and detector battery status to the system. It occupies one position in the system.
Specifications
- Power supply: via the control panel bus 12 V (9 - 15 V)
- Current consumption (idle/peak): 5 mA/5 mA
- Dimensions: 48 x 19 x 14 mm
- Environment according to: EN 50131-1 II. indoor, general
- Operating temperature range: -10 °C to +40 °C
- In conformity with: EN 50130-4, EN 55022, EN 50581
This is a plug-in module designed for direct installation in a stand-alone Ei208W or Ei208DW CO detector, which enables its bus connection to the JABLOTRON 100 system.
It transmits information about an alarm, detector activation and detector battery status to the system. It occupies one position in the system.
Specifications
- Power supply: via the control panel bus 12 V (9 - 15 V)
- Current consumption (idle/peak): 5 mA/5 mA
- Dimensions: 48 x 19 x 14 mm
- Environment according to: EN 50131-1 II. indoor, general
- Operating temperature range: -10 °C to +40 °C
- In conformity with: EN 50130-4, EN 55022, EN 50581
