This is a plug-in module designed for direct integration in the Ei208W or Ei208DW stand-alone CO detector that will enable its wired connection to a security or another system.
The module provides galvanic isolation of the wired output from the entire detector. It provides the system with information about alarms and detector errors.
Specifications
- Power supply: 9 - 15 V DC
- Current consumption (idle/maximum): 5 mA/5 mA
- Dimensions: 48 x 19 x 14 mm
- Environment: II. indoor, general (acc. to EN 50131-1)
- Operating temperature range: -10 °C to +40 °C
- In conformity with: EN 50130-4, EN 55022, EN 50581
The module provides galvanic isolation of the wired output from the entire detector. It provides the system with information about alarms and detector errors.
Specifications
- Power supply: 9 - 15 V DC
- Current consumption (idle/maximum): 5 mA/5 mA
- Dimensions: 48 x 19 x 14 mm
- Environment: II. indoor, general (acc. to EN 50131-1)
- Operating temperature range: -10 °C to +40 °C
- In conformity with: EN 50130-4, EN 55022, EN 50581
