Video Ground Loop Isolator could reduce "Ground Loop Interference" with CCTV signals and can easily install in a new or added to existing systems. It is useful where a video signal is transmitted via cable between points with different ground potentials, differences in ground potentials are typically caused by unbalanced power line loads.

Specifications:
- Insertion Loss: 0.5dB
- IFrequency Response: 0-3dB at 10Mhz
- IIsolation Voltage: 600VDC (Min)
- IInput Resistance: 75 ohm
- IOutput Resistance: 75 ohm
- IInsulation Resistance: 100m Ohm
- ITransient Voltage Suppressors: 12 Vrms
- IDimension: 69x25x22
- IMaterial: ABS Black

Features:
- IBNC male to 2 pin terminal block.
- IBuilt in Video BALUN .
- IPassive, no power required.
- IPrevents video-signal distortion caused by video ground loops.
- IEliminates picture tearing, cross talk and rolling.
- IPrevents power cables laid by others interfering with the CCTV system.
- IBuilt in TVS (Transient Voltage Suppressors) for surge protection.