Outdoor triple technology Pet-Immunity detector
The outdoor detector BOBBY-AM 1873, composed by two dual PIR infrared sensors and one microwave with planar cavity, has been designed and built to ensure maximum performance in outdoor environment. The electronic of detector is adjustable and allows to obtain an horizontal coverage of 85° distributed on a plane of 170°. The fixing of the detector can be both on wall and pole (height from 1 to 1,2 m).
The lower infrared beam, also vertically adjustable, allows to obtain a range of coverage between a minimum of 3 m and a maximum of 18 m. The three sensors, which are managed by a microcontroller, can be combined with each other depending on the installation requirements (triple AND, MW in AND with each PIR, AND of the PIR MW excluded, triple OR). To manage outputs, alarm and antimask, are used two solid state relay. The anti-masking was designed using active IR sensors that, through the Fresnel lenses, have the ability to detect obstacles voluntarily affixed on lenses to prevent detection (spray, tape, paper, etc.). If set in triple AND allows the discrimination of pets (PET IMMUNITY).
Specifications
- Detection: 2 PIR + microwave with 24 GHz frequency
- Power supply: 9 ÷ 15 Vdc
- Power consumption: 20 mA
- LED: 4 (Green PIR 1, green PIR 2, yellow MW, red alarm)
- Sensitivity: adjustable and independent for each technology
- Horizontal Coverage: 85°
- Detection range: adjustable from 3 to 18 m
- Adjustable lower PIR: micrometer through patented device
- Anti-masking output: dedicated NC
- Anti-mask function: active IRs
- AND / OR function: selectable through DIP, triple AND / triple OR / (PIR1OR PIR2) AND MW / PIR1 AND PIR2 (MW excluded)
- Sun Anti-blinding: through high efficiency mechanical filters
- Electronic board: 90° horizontally adjustable and sealed
- Housing: polycarbonate with Fresnel lens UV-resistant
- Bracket for wall fixing: stainless steel (supplied)
- Tamper protection: against opening and tearin
- Security Grade: Grade 3 (EN 50131)
- Environmental class: IV (EN 50131-1)
- Operating temperature: -25 °C ÷ + 60 °C
- Degree of Protection: IP44
- Dimensions: 81 x 76 x 189 mm
- Weight: 0.47 kg (bracket included)
The outdoor detector BOBBY-AM 1873, composed by two dual PIR infrared sensors and one microwave with planar cavity, has been designed and built to ensure maximum performance in outdoor environment. The electronic of detector is adjustable and allows to obtain an horizontal coverage of 85° distributed on a plane of 170°. The fixing of the detector can be both on wall and pole (height from 1 to 1,2 m).
The lower infrared beam, also vertically adjustable, allows to obtain a range of coverage between a minimum of 3 m and a maximum of 18 m. The three sensors, which are managed by a microcontroller, can be combined with each other depending on the installation requirements (triple AND, MW in AND with each PIR, AND of the PIR MW excluded, triple OR). To manage outputs, alarm and antimask, are used two solid state relay. The anti-masking was designed using active IR sensors that, through the Fresnel lenses, have the ability to detect obstacles voluntarily affixed on lenses to prevent detection (spray, tape, paper, etc.). If set in triple AND allows the discrimination of pets (PET IMMUNITY).
Specifications
- Detection: 2 PIR + microwave with 24 GHz frequency
- Power supply: 9 ÷ 15 Vdc
- Power consumption: 20 mA
- LED: 4 (Green PIR 1, green PIR 2, yellow MW, red alarm)
- Sensitivity: adjustable and independent for each technology
- Horizontal Coverage: 85°
- Detection range: adjustable from 3 to 18 m
- Adjustable lower PIR: micrometer through patented device
- Anti-masking output: dedicated NC
- Anti-mask function: active IRs
- AND / OR function: selectable through DIP, triple AND / triple OR / (PIR1OR PIR2) AND MW / PIR1 AND PIR2 (MW excluded)
- Sun Anti-blinding: through high efficiency mechanical filters
- Electronic board: 90° horizontally adjustable and sealed
- Housing: polycarbonate with Fresnel lens UV-resistant
- Bracket for wall fixing: stainless steel (supplied)
- Tamper protection: against opening and tearin
- Security Grade: Grade 3 (EN 50131)
- Environmental class: IV (EN 50131-1)
- Operating temperature: -25 °C ÷ + 60 °C
- Degree of Protection: IP44
- Dimensions: 81 x 76 x 189 mm
- Weight: 0.47 kg (bracket included)
