Wireless multifunctional relay for DIN-rail installation
The wireless multifunctional relay is a component of the JABLOTRON 100 system, but it can be equally installed as a stand-alone device without a link to a control panel.
It provides a switching contact relay with galvanic and safety isolation for switching 230 V/16 A power loads. The relay can respond to the status of control panel PG outputs or to the activation of devices of the JA-15x series with unidirectional communication, enrolled directly to the relay. The response can be selected from five modes - the default NATURAL function (extended copy), IMPULSE, STATUS CHANGE, SWITCH OFF and BLOCK. The relay also has a button for a direct manual status change. It allows you to update the firmware via a USB port. It is designed to be mounted on a DIN rail. It occupies one position in the system.
Specifications
- Power supply: ~ 230 V / 50 Hz, protective class II.
- Internal power consumption: 0.4 W / max. 1.5 W
- Loading capacity of the power relay contacts: (galvanically isolated from the control terminals): protection class II:
Max. switched voltage: 250 V AC / 24 V DC
Resistance load (cos?=1): max. 16 A
Inductive, capacitive loads (cos?=0.4): max. 8 A
Halogen lighting: max. 1000 W
Minimum switched DC power: 0.5 W
- Wire cross section: max. 2 x 1.5 mm2; max. 1 x 2.5 mm2
- Dimensions: 18 x 90 x 65 mm, 1 DIN module
- Environment according to: II. indoor, general, in accordance with EN 50131-1
- Operating temperature range: -10 to +40 °C
- Ingress protection class: IP20, IP40 for the front panel (EN 60529)
- In conformity with: ETSI EN 300 220-1, EN 60950-1, EN 60947-6-1, EN 50581.
The wireless multifunctional relay is a component of the JABLOTRON 100 system, but it can be equally installed as a stand-alone device without a link to a control panel.
It provides a switching contact relay with galvanic and safety isolation for switching 230 V/16 A power loads. The relay can respond to the status of control panel PG outputs or to the activation of devices of the JA-15x series with unidirectional communication, enrolled directly to the relay. The response can be selected from five modes - the default NATURAL function (extended copy), IMPULSE, STATUS CHANGE, SWITCH OFF and BLOCK. The relay also has a button for a direct manual status change. It allows you to update the firmware via a USB port. It is designed to be mounted on a DIN rail. It occupies one position in the system.
Specifications
- Power supply: ~ 230 V / 50 Hz, protective class II.
- Internal power consumption: 0.4 W / max. 1.5 W
- Loading capacity of the power relay contacts: (galvanically isolated from the control terminals): protection class II:
Max. switched voltage: 250 V AC / 24 V DC
Resistance load (cos?=1): max. 16 A
Inductive, capacitive loads (cos?=0.4): max. 8 A
Halogen lighting: max. 1000 W
Minimum switched DC power: 0.5 W
- Wire cross section: max. 2 x 1.5 mm2; max. 1 x 2.5 mm2
- Dimensions: 18 x 90 x 65 mm, 1 DIN module
- Environment according to: II. indoor, general, in accordance with EN 50131-1
- Operating temperature range: -10 to +40 °C
- Ingress protection class: IP20, IP40 for the front panel (EN 60529)
- In conformity with: ETSI EN 300 220-1, EN 60950-1, EN 60947-6-1, EN 50581.