• The RC3-610M/DALI is an I/O actuator equipped with 6 binary inputs, of which 2 can be confi gured as temperature inputs and 8 independent relays with switching potential-free and potential contacts. It also includes two analog outputs 0(1)-10 V with a load capacity of up to 10 mA.
• Binary inputs RC3-610M/DALI are used for connecting up to 6 devices with a non-decimal contact (such as switches, switches, buttons of other designu, EZS and EPS detectors and others).
• Temperature inputs support the connection of TC/TZ temperature sensors in a 2-wire connection for temprature sensing needs.
• The actuator is designed for switching up to eight diff erent appliances and loads by relay output (potential-free contact).
• The maximum load capacity of the relay contacts is 10 A/2500 VA/ AC1. Each of the output contacts is individually controllable. Relays
are divided into four pairs, where each pair switches on its common potential.
• The DALI system BUS allows control of up to 16 independent DALI (Digital Addressable Lighting Interface) ballast addresses for fluorescent, LED and other luminaires.
• Analog outputs are considered for use with thermoregulation heads, air-conditioning ventilation fl aps, various other dimmers or other devices with an analog control voltage of 0-10 V or 1-10 V.
• The parameters of all confi gurable inputs and outputs are set in the iNELS Designer & Manager confi guration software environment, which
is designed for Windows 7, 8 and 10 operating systems.
• RC3-610M/DALI in 6-MODULE version is designed for mounting into a switchboard on DIN rail EN60715.
• Binary inputs RC3-610M/DALI are used for connecting up to 6 devices with a non-decimal contact (such as switches, switches, buttons of other designu, EZS and EPS detectors and others).
• Temperature inputs support the connection of TC/TZ temperature sensors in a 2-wire connection for temprature sensing needs.
• The actuator is designed for switching up to eight diff erent appliances and loads by relay output (potential-free contact).
• The maximum load capacity of the relay contacts is 10 A/2500 VA/ AC1. Each of the output contacts is individually controllable. Relays
are divided into four pairs, where each pair switches on its common potential.
• The DALI system BUS allows control of up to 16 independent DALI (Digital Addressable Lighting Interface) ballast addresses for fluorescent, LED and other luminaires.
• Analog outputs are considered for use with thermoregulation heads, air-conditioning ventilation fl aps, various other dimmers or other devices with an analog control voltage of 0-10 V or 1-10 V.
• The parameters of all confi gurable inputs and outputs are set in the iNELS Designer & Manager confi guration software environment, which
is designed for Windows 7, 8 and 10 operating systems.
• RC3-610M/DALI in 6-MODULE version is designed for mounting into a switchboard on DIN rail EN60715.