The PR302LCD controller is dedicated for use in Access Control and Time & Attendance systems. It may be configured to perform both function simultaneously or exclusively. PR302LCD has a built-in proximity reader, 12 digit metal keypad and LCD display. Controller offers three inputs, one relay output and two transistor outputs. Inputs and outputs can be configured to several pre-defined functions. PR302LCD can register up to 4000 users, every user can be identify by Card, PIN or both method together (Card+PIN). The reader which is build-in into controller accepts UNIQUE standard cards (EM4001/2 or compatible). Controller offers In Circuit Programming feature which enables firmware downloading into microprocessor memory. PR302LCD may operate with one external identification terminal (PRT series terminal or Wiegand interface reader). Usually an remote identification terminal is used when door has to be controlled on both side or when controller has to be located in protected area (room) in order to avoid access of unauthorized person to controller's electronic circuit. PR302LCD may activate door lock through internal relay output (REL1) or through relay output located on XM-2 remote I/O expander. Because an XM-2 module can be installed in remote, secure location the use of XM-2 expander increase overall controller's security level significantly. PR302LCD may operate is autonomic mode or in networked system equipped with CPR control panel or without it. Due to complex and wide range of settings which can be defined in controller PR302LCD can not be programmed manually, it can be downloaded from PC computer only. Programming from PC requires UT-2 communication interface.
PR302LCD features
- Single door, dual side, access controller with integrated RFID/PIN reader.
- Autonomic or networked operation.
- Card and/or PIN identification.
- Card usage limit definition.
- Card time period limit definition.
- 4000 users.
- 250 access groups.
- 500 access zones.
- 99 general purpose time schedules.
- Holiday schedules.
- Non violate 32 000 event buffer.
- Real Time Clock.
- 2 x 16 Char LCD display with backlight.
- Three multipurpose NO/NC inputs.
- Two multipurpose, electronically protected 1A transistor outputs.
- One relay output (form C contacts, 1.5A rated).
- Door lock controlled by internal relay output or by remote secure relay module (XM-2).
- Inputs/Outputs controlled by time schedules.
- Four user types: Normal, Swicher full, Switcher limited and Master.
- Door contact, Exit button, Forced entry, Duress and more function.
- Soft or Hard mode anti-passback with reset schedule.
- Special door lock modes: Normal, Locked, Unlocked and Conditional Unlocked.
- Card or PIN and Card+PIN, identification modes, each under schedule control.
- Special entry modes; Card+Card and Conditional Access, both under schedule control.
- High Security identification mode (requires additional reader e.g. biometric).
- Customer defined T&A registration modes.
- T&A registration modes controlled manually from keypad, by external line or by schedule.
- Integration with IAS (Intruder Alarm System) through dedicated output line.
- Intruder Detector Input with automatic Arming/Disarming feature.
- Capable to operate with one remote identification terminal (reader).
- PRT (Roger) series and Wiegand 26/34/42/66 bit reader support.
- XM-2 remote I/O expander support.
- PSAM-1 power supply alarm module support.
- XM-8 lift access control module support.
- Biometric reader support.
- Firmware upgrade available.
- Metal case and keypad.
- RS485 interface.
- 12VDC/120mA supply.
- Accepts UNIQUE (EM4001/2) cards.
- 7 cm reading range for ISO card.
- Windows 95/98//NT/ME/2K/XP software, license free for systems up to 8 doors.
- Programming via PC, manual programming not available.
- Transactional method of programming.
- Comply with EN 50133-4.
- CE mark.
PR302LCD features
- Single door, dual side, access controller with integrated RFID/PIN reader.
- Autonomic or networked operation.
- Card and/or PIN identification.
- Card usage limit definition.
- Card time period limit definition.
- 4000 users.
- 250 access groups.
- 500 access zones.
- 99 general purpose time schedules.
- Holiday schedules.
- Non violate 32 000 event buffer.
- Real Time Clock.
- 2 x 16 Char LCD display with backlight.
- Three multipurpose NO/NC inputs.
- Two multipurpose, electronically protected 1A transistor outputs.
- One relay output (form C contacts, 1.5A rated).
- Door lock controlled by internal relay output or by remote secure relay module (XM-2).
- Inputs/Outputs controlled by time schedules.
- Four user types: Normal, Swicher full, Switcher limited and Master.
- Door contact, Exit button, Forced entry, Duress and more function.
- Soft or Hard mode anti-passback with reset schedule.
- Special door lock modes: Normal, Locked, Unlocked and Conditional Unlocked.
- Card or PIN and Card+PIN, identification modes, each under schedule control.
- Special entry modes; Card+Card and Conditional Access, both under schedule control.
- High Security identification mode (requires additional reader e.g. biometric).
- Customer defined T&A registration modes.
- T&A registration modes controlled manually from keypad, by external line or by schedule.
- Integration with IAS (Intruder Alarm System) through dedicated output line.
- Intruder Detector Input with automatic Arming/Disarming feature.
- Capable to operate with one remote identification terminal (reader).
- PRT (Roger) series and Wiegand 26/34/42/66 bit reader support.
- XM-2 remote I/O expander support.
- PSAM-1 power supply alarm module support.
- XM-8 lift access control module support.
- Biometric reader support.
- Firmware upgrade available.
- Metal case and keypad.
- RS485 interface.
- 12VDC/120mA supply.
- Accepts UNIQUE (EM4001/2) cards.
- 7 cm reading range for ISO card.
- Windows 95/98//NT/ME/2K/XP software, license free for systems up to 8 doors.
- Programming via PC, manual programming not available.
- Transactional method of programming.
- Comply with EN 50133-4.
- CE mark.
