Bus emergency/control wall-mounted button
The JA-112J bus wall-mounted button is designed to release an emergency alarm or to control PG outputs.
It is equipped with two buttons and a signal LED that can indicate pressing of a button on activation or switching a PG output on or off (with red/green light). It also has the function of the delayed activation of an emergency alarm (when the activation can be cancelled with repeated pressing). A delayed alarm is indicated by flashing of the red LED. The button is addressable and it occupies one position in the system
Specifications
- Power supply: from the control panel bus, 12 V (9-15V)
- Consumption in idle state: 5 mA
- Dimensions: 80 x 80 x 29 mm
- Environmental class: II. General indoor according to EN 50131-1
- Operation temperature range: -10 to +40 °C
- Security grade: 2 in acc. with EN 50131-1, EN 50131-3, EN 50134-2
- It also meets the requirements of: EN 50130-4, EN 55022
The JA-112J bus wall-mounted button is designed to release an emergency alarm or to control PG outputs.
It is equipped with two buttons and a signal LED that can indicate pressing of a button on activation or switching a PG output on or off (with red/green light). It also has the function of the delayed activation of an emergency alarm (when the activation can be cancelled with repeated pressing). A delayed alarm is indicated by flashing of the red LED. The button is addressable and it occupies one position in the system
Specifications
- Power supply: from the control panel bus, 12 V (9-15V)
- Consumption in idle state: 5 mA
- Dimensions: 80 x 80 x 29 mm
- Environmental class: II. General indoor according to EN 50131-1
- Operation temperature range: -10 to +40 °C
- Security grade: 2 in acc. with EN 50131-1, EN 50131-3, EN 50134-2
- It also meets the requirements of: EN 50130-4, EN 55022