CPR32-SE Network Controller is an optional Roger Access Control System (RACS) component. Using CPR32-SE in the system expands its functionality with specific features. When used with PRxx1 series controllers CPR32-SE allows for logging events and defining time-based access rights, as well as to realize global type functions such as APB zones or alarm zones. In case of PRxx2 series controllers, CPR32-SE provides a global type functions only (APB, alarm zones).

Features:
- One CPR32-SE unit per single access network with up to 32 controllers
- Real time clock with battery back-up
- Event buffer (250.000)
- Programmable inputs/outputs
- Two 1.5A/30V relay outputs
- Two 1A/15V transistor outputs
- Four NO/NC inputs
- RS485 interface (free topology)
- Relay output for alarm states signaling
- Firmware upgrade
- 1.5A buffered power supply
- 18-22 VAC supply
- CE mark

Technical Specification
Supply voltage: 18-22 VAC lub 10-15VDC
Power consumption: 30VA
Environmental class: Class I, Indoor, temperature: +5ºC - +40ºC, relative humidity: 10 to 95% (non-condensing)
Dimensions H x W x D: 151 X 87 mm
Weight: 100g
Approvals: CE