The installation set AC8002 is designed for installation of Fire Detectors 7000 and 8000 Series in damp premises or premises where condensate is formed; for example, hangars, tunnels, underground stations, shafts, etc. The set might be used with bases
8000, 8000D, 8000R, 8000RD, 7100, 7100A. The penetration of condensate in the installed Fire detectors with not-protected bases triggers them falsely. The moisture on the contact system causes corrosion and it is possible to disable it completely. The installation set AC8002 protects the Fire detector base from the penetration of condensate. The base is fixed to the installation set on high columns ensuring an intermediate space for extra heat insulation. The intermediate base is compact with four side faces. The places to be pierced for the installation pipe unions on the bottom and the side faces. The installation pipe unions must be used when laying the conducting wires to secure air-tightness.
TECHNICAL DATA
Height: 65 mm
Inside diameter:104 mm
Mass: 75 g
Material: ABS Colour white
Option for installation of pipe unions for cables (EPN, NPT, etc.): M22
8000, 8000D, 8000R, 8000RD, 7100, 7100A. The penetration of condensate in the installed Fire detectors with not-protected bases triggers them falsely. The moisture on the contact system causes corrosion and it is possible to disable it completely. The installation set AC8002 protects the Fire detector base from the penetration of condensate. The base is fixed to the installation set on high columns ensuring an intermediate space for extra heat insulation. The intermediate base is compact with four side faces. The places to be pierced for the installation pipe unions on the bottom and the side faces. The installation pipe unions must be used when laying the conducting wires to secure air-tightness.
TECHNICAL DATA
Height: 65 mm
Inside diameter:104 mm
Mass: 75 g
Material: ABS Colour white
Option for installation of pipe unions for cables (EPN, NPT, etc.): M22
